NEC UNIVERGE SV8100 Features & Specifications Manual page 532

Issue 5.0
Timer Timer
Class 0 Class 1~15
22-01-04 20-31-08
22-01-06 20-31-09
24-01-01 20-31-10
24-01-02 20-31-11
24-01-03 20-31-12
24-01-04 20-31-13
24-01-06 20-31-14
24-02-03 20-31-15
24-02-04 20-31-16
25-07-02 20-31-17
25-07-03 20-31-18
25-07-07 20-31-19
1 - 522
Title
DIL No Answer Recall Time
DID Ring-No-Answer Time
Hold Recall Time (Non
Exclusive Hold)
Hold Recall Callback Time
(Non Exclusive Hold)
Exclusive Hold Recall Time
Exclusive Hold Recall
Callback Time
Park Hold Time – Normal
Delayed Call Forwarding
Time
Transfer Recall Time
VRS/DISA No Answer Time
Disconnect after VRS/DISA
Re-transfer to IRG
Long Conversation Warning
Tone Time
Comment
A DIL that rings its programmed destination longer
than this time diverts to the DIL No Answer Ring
Group (Program 22-08-01). Trunk Timer Class is
referred by the trunk.
In systems with DID Ring No Answer Intercept,
this time sets the Ring No Answer time. This time
is how long a DID call rings the destination
extension before rerouting to the intercept ring
group. Trunk Timer Class is referred by DID trunk.
A call on Hold recalls the extension that placed it
on Hold after this time. Station Timer Class is
referred by held call.
A Hold recall rings an extension for this time.
Station Timer Class is referred by held call.
A call on Hold recalls the extension that placed it
on Hold after this time. Station Timer Class is
referred by held call.
An Exclusive Hold Recall rings an extension for
this time. If not picked up, the call goes back on
Non exclusive Hold. Station Timer Class is
referred by held call.
A call left parked longer than this time recalls the
extension that initially parked it. Trunk or Station
Timer Class is referred by held call.
If activated at an extension, No Answer Call
Forwarding occurs after this time. Station Timer
Class is referred by the station sets No Answer
Call Forward.
A transferred call recalls to the extension that
initially transferred it after this time. Station Timer
Class is referred by transferred call.
After this time expires, the call follows the
programmed Ring No Answer routing (Program
25-03 and 25-04-01). Trunk Timer Class is
referred.
Disconnect after re-transfer to Incoming Ring
Group. Trunk Timer Class is referred.
Determine the time trunk-to-trunk conversation
can talk before the Long Conversation tone is
heard. Trunk Timer Class is referred.
UNIVERGE SV8100
Flexible Timeouts