NEC UNIVERGE SV8100 Features & Specifications Manual page 274

Issue 5.0
Program
Number
20-09-01
20-09-02
20-09-03
20-09-04
20-09-05
20-09-06
20-09-07
20-09-08
1 - 264
Program Name
Class of Service Options
(Incoming Call Service) –
Second Call for DID/DISA/DIL/
E&M Override
Class of Service Options
(Incoming Call Service) – Caller
ID Display
Class of Service Options
(Incoming Call Service) – Sub
Address Identification
Class of Service Options
(Incoming Call Service) –
Notification for Incoming Call
List Existence
Class of Service Options
(Incoming Call Service) – Signal/
Voice Call
Class of Service Options
(Incoming Call Service) –
Incoming Time Display
Class of Service Options
(Incoming Call Service) – Call
Queuing
Class of Service Options
(Incoming Call Service) – Calling
Party Information
Description/Comments
Turns off or on the extension
ability to receive a second call
from a DID, DISA, DIL, or tie line
caller.
. With this option set to 1, the
destination extension must
be busy for a second DNIS
caller to ring through. If the
destination extension does
not have a line or Call
Appearance (CAP) Keys
available for the second call
and a previous call is ringing
the extension but has not
been answered, the second
caller hears busy regardless
of this program setting.
Turns Off (0) or On (1) the Caller
ID display at an extension.
Define whether an extension
displays the Caller Sub-Address.
Determine whether or not the
CHECK LIST message is
displayed to indicate a missed call.
Turn off or on an extension ability
to enable Handsfree Answerback
or Forced Intercom Ringing for
their incoming Intercom calls.
If this option is set to 1, the
Incoming Call Time is displayed on
the multiline terminals LCD while
the telephone is ringing.
Turn Off (0) or On (1) an extension
ability to have calls queued if a call
rings the extension when it is busy.
Turn off or on and extension user
ability to display calling party
information on CCIS calls.
UNIVERGE SV8100
Assigned Data
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for COS
01~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
Class of Service