NEC UNIVERGE SV8100 Features & Specifications Manual page 186

Issue 5.0
To activate Call Forwarding Off-Premise for a Door Box:
.
This option only works for ISDN PRI or BRI Trunks.
1. At the multiline terminal, press Speaker + dial SC 822.
- OR -
At the multiline terminal only, press Call Forward (Device) key (Program 15-07-01 or SC 851, code
54).
- OR -
At the single line telephone, lift the handset + dial 822.
2. Dial the Door Box number (1~4).
3. Dial the Speed Dialing number where the calls should be forwarded.
4. Press Speaker (or hang up at the single line telephone) to hang up.
To cancel Call Forwarding Off-Premise for a Door Box:
1. At the multiline terminal, press Speaker + dial SC 822.
- OR -
At the multiline terminal only, press Call Forward (Device) key (Program 15-07-01 or SC 851, code
54).
- OR -
At the single line telephone, lift the handset + dial 822.
2. Dial 0 (Cancel).
Trunk-to-Trunk Forwarding
Set the Destination and Forward the Line:
1. Lift the handset.
2. Dial 835.
3. Dial trunk port number (001~200) to be defined.
4. Select the mode (1~8) to be defined.
5. Enter the telephone number, which is the destination of the forwarded trunk.
The number is stored in the Speed Dial bin number assigned in Program 24-04-01. This entry overwrites any
.
existing number defined in the bin.
6. Press Hold to accept the entry.
7. Repeat from Step 3 to define another mode entry or press Speaker to hang up.
1 - 176
UNIVERGE SV8100
Call Forwarding, Off-Premise