NEC UNIVERGE SV8100 Features & Specifications Manual page 632

Hide thumbs Also See for UNIVERGE SV8100:
Table of Contents

Advertisement

Issue 5.0
Calling Party Number Presentation for either ISDN – BRI or PRI
Program
Number
10-03-05
15-01-04
20-06-01
20-08-13
21-12-01
1 - 622
Program Name
ETU Setup (PRTA PKG Setup) –
CLIP Information Announcement
Basic Extension Data Setup –
ISDN Caller ID
Class of Service for Extensions
Class of Service Options
(Outgoing Call Service) – ISDN
CLIP
ISDN Calling Party Number
Setup for Trunks
Description/Comments
Based on this setting, the system
includes a Presentation Allowed
(1) or Presentation Restricted (0)
in the Setup message to allow or
deny the Calling Party Number.
Program 15-01-04 must also be
set to 1 if this option is enabled.
If both Program 15-01-04 and
Program 10-03-05 are enabled
(1), the system includes Caller ID
in the Setup message as
Presentation Allowed. If these
options are disabled (0), it is
Presentation Restricted.
Assign a Class of Service (1~15)
to an extension.
Determine if the ISDN calling line
identity presentation and
screening indicators are to be
allowed.
Assign Calling Party Numbers for
each trunk (maximum 16 digits per
entry). When a call is made by an
extension which does not have an
Extension Calling Number
assigned (Program 21-13), the
system sends the calling number
for the ISDN trunk defined in
21-12. If the Calling Party Number
is assigned in both Program 21-12
and Program 21-13, the system
sends the data in Program 21-13.
UNIVERGE SV8100
Assigned Data
0 = Disable
1 = Enable
(default = 1)
0 = Disable
1 = Enable
(default = 1)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 0)
(maximum 16 digits)
*
#
1-0,
,
Default:
(All trunks = No setting)
ISDN Compatibility

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents