NEC UNIVERGE SV8100 Features & Specifications Manual page 633

UNIVERGE SV8100
Program
Number
21-13-01
ISDN – PRI Network Specific Assignment
Program
Number
26-02-07
26-12-01
26-12-02
44-05-11
ISDN Compatibility
Program Name
ISDN Calling Party Number
Setup for Extensions
Program Name
Dial Analysis Table for ARS/LCR
– Network Specified Parameter
Table
Network Specified Parameter
Table for ARS – Type of Number
Network Specified Parameter
Table for ARS – Numbering Plan
Identification
ARS/F-Route Table – Network
Specified Parameter Table
Description/Comments
Assign each extension a Calling
Party Number (maximum 16 digits
per entry). The calling number is
the subscriber number of the
dial-in number. When a call is
made by an extension which does
not have an Extension Calling
Number assigned (Program
21-12), the system sends the
calling number for the ISDN trunk
defined in Program 21-13. If a
Calling Party Number is assigned
in both Program 21-12 and
Program 21-13, the system sends
the data in Program 21-13.
Description/Comments
Use this program to define the
network specified parameter table
for each ARS Table.
Use this program to define the
type of Number parameter for an
ISDN outgoing call.
Use this program to define the
Numbering Plan Identification
Parameter for an ISDN outgoing
call.
Use this program to define the
network specified parameter table
for each F-Route table.
Issue 5.0
Assigned Data
* #
0~9, ,
(Max. 16 digits)
(default not assigned)
Assigned Data
0~16
(default = 0)
0 = System Default
1 = Unknown
2 = International No.
3 = National No.
4 = Network Specific
No.
5 = Subscriber No.
6 = Abbreviated No.
(default = 0)
0 = System Default
1 = Unknown
2 = ISDN Plan
3 = Data Plan
4 = Telex Plan
5 = National Standard
Plan
6 = Private Plan
(default = 0)
0~16
(default = 0)
1 - 623