NEC UNIVERGE SV8100 Features & Specifications Manual page 152

Issue 5.0
Program
Number
31-04-01
31-06-01
31-06-02
40-10-01
40-10-05
Operation
To have the system page you when you have a call:
1. Press Speaker (or lift the handset at the single line telephone) and dial 795.
2. When you hear, "Please start recording," record you Personal Greeting.
1 - 142
Program Name
External Paging Zone Group –
Paging Group Number
External Speaker Control –
Broadcast Splash Tone Before
Paging (Paging Start Tone)
External Speaker Control –
Broadcast Splash Tone After
Paging (Paging End Time)
Voice Announcement Service
Option – VRS Fixed Message
Voice Announcement Service
Option – Park and Page Repeat
Timer (VRS Msg Resend)
Description/Comments
Assign each External Paging
Speaker to an External Paging
Zone.
Use this option to enable or
disable splash tone before Paging
over an external zone. If enabled,
the system broadcasts a splash
tone before the External Paging
announcement.
Use this option to enable or
disable splash tone after Paging
over an external zone. If enabled,
the system broadcasts a splash
tone at the end of an External
Paging announcement.
Enable (1) or disable (0) the
system ability to play the fixed
VRS messages (such as You have
a message.).
If a Park and Page is not picked up
in this interval, the Paging
announcement repeats.
Call Forwarding – Park and Page
UNIVERGE SV8100
Assigned Data
Paging Group Number
0~8 (0 = No Setting)
Speaker 1 [PGD(2)-U10
ADP] = 1 (Group 1)
Speaker 2 [PGD(2)-U10
ADP] = 2 (Group 2)
Speaker 3 [PGD(2)-U10
ADP] = 3 (Group 3)
Speaker 4 [PGD(2)-U10
ADP] = 4 (Group 4)
Speaker 5 [PGD(2)-U10
ADP] = 5 (Group 5)
Speaker 6 [PGD(2)-U10
ADP] = 6 (Group 6)
Speaker 7 [PGD(2)-U10
ADP] = 7 (Group 7)
Speaker 8 [PGD(2)-U10
ADP] = 8 (Group 8)
Speaker 9 (CD-CP00) =
1 (Group 1)
0 = No Tone (None)
1 = Splash Tone
2 = Chime Tone
(default = 2)
0 = No Tone (None)
1 = Splash Tone
2 = Chime Tone
(default = 2)
0= Not Used
1= Used
(default = 0)
0~64800 (seconds)
(default = 0 seconds)