NEC UNIVERGE SV8100 Features & Specifications Manual page 696

Hide thumbs Also See for UNIVERGE SV8100:

Table of Contents

If all external trunks are busy when a call is made to the mobile extension, ringback tone is presented giving the

impression the phone is ringing.

A DID is directed to the Mobile Extension internal extension number (Proxy Port), and to provide internal

dial tone to the Mobile Extension, the incoming CLI of the Mobile Extension must match the number in

the Speed Dial bin. Once internal dial tone is presented, the operation is similar to an SLT user lifting the

In the absence of DIDs, the VRS can be used to transfer the Mobile Extension call to the Mobile

Extension extension number. This provides internal dial tone when the CLI is presented and matches the

number in the associated Speed Dial bin.

Alternatively, if CLI routing is enabled, the relevant Speed Dial bin could be transferred to the Mobile

Extension proxy port which would then provide internal dial tone.

The number of Mobile Extensions per system is limited by the following CD-CP00 rules:

64-Port Basic CD-CP00:

Number of Mobile Extension ports = 25% of physical ports (8 ports allows for 2 Mobile Extension

This restriction is based on the number of ports which could be required to call the mobile

extension (for example: 1 port for an SV8100 keyset, 1 port for the Mobile Extension, and 1 or 2

trunk ports – depending on whether the call being sent to the Mobile Extension is an intercom call

or an outside caller).

256-Port CD-CP00:

Unlimited (limited only by available unequipped extension ports)

Max Port CD-CP00:

Unlimited (limited only by available unequipped extension ports)

When the limit is reached, the Mobile Extensions can be added in programming, but give the indication of an

invalid dial entry when called.

The features available from a Mobile Extension are listed below. As the Mobile Extension is based on an

SLT port, the service codes used are as per an SLT port. Any feature not listed should be assumed to be

not supported:

Incoming Ring Group member

Department Group member

UNIVERGE SV8100

Mobile Extension

Show Quick Links

Table of Contents