NEC UNIVERGE SV8100 Features & Specifications Manual page 142

Issue 5.0
All Flexible Line keys on a multiline terminal can be assigned as CAP keys in System
Programming.
A conference call involving two outside lines cannot reside on one Call Appearance key.
For Call Appearance (CAP) Keys, trunks must be assigned to trunk group 1 or higher
(Program 14-05-01). Trunk Group 0 means KF (Key Function) mode.
CAP Keys can be programmed from 0001~9999. 0000 assigns the next available CAP
Key.
Trunk Group (*02), Virtual Extension (*03) and Call Appearance (CAP) Key (*08), codes
cannot be programmed on a DSS Console as the system does not allow entry of the
additional data required.
If you have both trunk line keys and Call Appearance (CAP) Keys, the line key has priority.
An incoming call rings the trunk line key and when answered, the trunk line keys lights, not
the CAP Key. When you access the trunk for an outgoing call, the Trunk line key lights, not
the Call Appearance (CAP) Key.
Command 20-02-23 must be set to 0 (original operation mode) for CAP keys to operate.
Default Setting
Disabled
System Availability
Terminals
All Multiline Terminals
Required Component(s)
None
Related Features
Automatic Route Selection
Central Office Calls, Answering
Central Office Calls, Placing
1 - 132
UNIVERGE SV8100
Call Appearance (CAP) Keys