NEC UNIVERGE SV8100 Features & Specifications Manual page 49

UNIVERGE SV8100
Guide to Feature Programming
Program
Number
10-03-01
10-03-06
11-06-01
11-08-01
14-09-01
14-09-02
Analog Communications Interface (ACI)
Program Name
ETU Setup (DLCA PKG Setup) –
Terminal Type (B1)
ETU Setup (DLCA PKG Setup) –
Terminal Type (B2)
ACI Extension Numbering
ACI Group Pilot Number
Conversation Recording
Destination for Trunks – ACI
Recording Destination
Extension Number
Conversation Recording
Destination for Trunks – ACI
Automatic Recording for
Incoming Calls
Description/Comments
Assigns or displays the current
terminal type assigned to B
Channel 1 for each port on the
DLCA.
Assigns or displays the current
terminal type assigned to B
Channel 2 for each port on the
ESI.
Assign extension numbers to ACI
software ports. Select a number
outside of the normal extension
number range.
Assign pilot numbers to ACI
groups. When a user dials the pilot
number, they reach an available
ACI software port within the group.
Use this option to assign the ACI
Call Recording destination per
trunk. The destination can be an
ACI port extension number
(assigned in Program 11-06-01) or
an ACI Department Group pilot
number (assigned in Program
11-08-01). If destinations are
assigned in Program 14-09 and
Program 15-12, the destination in
Program 15-12 is followed.
Determine whether or not a trunk
should be automatically recorded
when an incoming call is received.
Issue 5.0
Assigned Data
0 = Not set
1 = Multiline Terminal
2 = SLT Adapter
3 = Bluetooth Cordless
Handset
6 = PGD (Paging)
7 = PGD (Tone Ringer)
8 = PGD (Doorbox)
9 = PGD (ACI)
10 = DSS Console
11 = -- Not Used --
(default = 0)
0 = Not set
6 = PGD(2)-U10 ADP
(Paging)
7 = PGD(2)-U10 ADP
(Tone Ringer)
8 = PGD(2)-U10 ADP
(Door Box)
9 = PGD(2)-U10 ADP
(ACI)
12 = APR (B2 Mode)
(default = 0)
ACI Ports: 1~96
(default not assigned)
ACI Groups 1~16
(default not assigned)
Extension Number =
Maximum eight digits
(default not assigned)
0 = Off
1 = On
(default = 0)
1 - 39