NEC UNIVERGE SV8100 Features & Specifications Manual page 326

Issue 5.0
Guide to Feature Programming
Program
Number
11-12-08
11-12-47
11-12-57
11-12-58
11-16-02
14-01-04
15-02-24
15-07-01
20-06-01
1 - 316
Program Name
Service Code Setup (for Service
Access) – Barge-In
Service Code Setup (for Service
Access) – Call Waiting Answer/
Split Answer
Service Code Setup (for Service
Access) – Tandem Trunking
Service Code Setup (for Service
Access) – Transfer Into
Conference
Single Digit Service Code Setup
– Barge-In
Basic Trunk Data Setup –
Transmit Gain Level for
Conference and Transfer Calls
Multiline Telephone Basic Data
Setup – Conference Key Mode
Programmable Function Keys
Class of Service for Extensions
Description/Comments
Determine what the service code
should be for an internal party to
use the Barge-In feature.
If required, use this program to
change the code users dial to Split
while on a call.
With two trunks in Conference
press the Hold key and dial 753
and the Conference/Tandem
happens.
If required, change the service
code used to transfer a call into a
Conference call.
Use to customize the one-digit
Service Codes used for Barge-In.
Use to select the CODEC gain
type used by the trunk when it is
part of an unsupervised
conference.
This option allows an extension
Conf key to be programmed for
Conference or for Transfer. When
set for Transfer (1), the user
places a call on hold, dials the
extension to which it should be
transferred, the presses the Conf
key. The call is then transferred.
When set for Conference (0), with
an active call, the user presses the
Conf key, places a second call,
then presses the Conf key twice.
All the calls are then connected.
Use to assign functions to multiline
terminal line keys.
Assign a Class of Service (1~15)
to extensions.
UNIVERGE SV8100
Assigned Data
MLT, SLT
(default = 810)
SLT
(default = 894)
MLT, SLT
(default = 753)
MLT, SLT
(default not assigned)
(default not assigned)
1~63(-15.5dB ~
+15.5dB in 0.5dB
intervals)
[default = 32 (0dB)]
0 = Conference
1 = Transfer
(default = 0)
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
* *
00 ~ 99
(Appearance Function
Code) (Service Code
852 by default)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
All extension ports =
Class 1
Conference