NEC UNIVERGE SV8100 Features & Specifications Manual page 617

Hide thumbs Also See for UNIVERGE SV8100:
Table of Contents

Advertisement

UNIVERGE SV8100
Program
Number
20-08-10
20-09-05
20-13-06
80-01-01
(28)
80-01-02
82-01-01
Intercom
Program Name
Class of Service Options
(Outgoing Call Service) – Signal/
Voice Call
Class of Service Options
(Incoming Call Service) – Signal/
Voice Call
Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
Service Tone Setup – Tone 28
(Speaker Monitor Tone)
Service Tone Setup – Basic Tone
Number
Incoming Ring Tone – Frequency
1
Incoming Ring
Tone Number
Pattern 1
(Trunk Incoming)
Description/Comments
Turns Off or On an extension
allowing it to force Handsfree
Answerback or Forced Intercom
Ringing for outgoing Intercom
calls.
Turn off or on an extension ability
to enable Handsfree Answerback
or Forced Intercom Ringing for
their incoming Intercom calls.
Allows a busy extension ability to
manually (0) or automatically (1)
receive Off-Hook Signals.
This tone changes the tone the
originator of an ICM call hears.
(The tone cannot be changed for
what is heard by the user when
receiving an ICM call.)
Use to define up to 64 Service
Tones. Each service tone is
defined by the combination of 32
Basic Tones.
Customize the Intercom ring tone.
Table 1-12 Incoming Ringing Tone
Tone
Frequency 1
Type
High
1100
Mid
660
Low
520
Assigned Data
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
Refer to Service tones
(Service Tone #28).
1~33
(0 = No Tone)
(33=Default Time Slot).
1 = 520Hz
2 = 540Hz
3 = 660Hz
4 = 760Hz
5 = 1100Hz
6 = 1400Hz
7 = 2000Hz
Default:
Refer to
Table 1-12
Incoming Ringing Tone
on page 1-607
Frequency 2
Modulation
1400
16Hz Modulation
760
16Hz Modulation
660
16Hz Modulation
Issue 5.0
1 - 607

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents