NEC UNIVERGE SV8100 Features & Specifications Manual page 954

Issue 5.0
Guide to Feature Programming
Program
Number
10-12-01
10-20-01
10-20-03
14-01-06
14-04-01
15-01-03
1 - 944
Program Name
CD-CP00 Network Setup – IP
Address
LAN Setup for External
Equipment – TCP Port
LAN Setup for External
Equipment – Keep Alive Time
Basic Trunk Data Setup – SMDR
Printout
Behind PBX Setup
Basic Extension Data Setup –
SMDR Printout
Description/Comments
Assign the IP Address.
Define the TCP port (0~65535)
when communicating to the SMDR
(type 5).
Use to define the keep alive time
for communicating to external
equipment.
Use this option to have the system
include(1) or exclude (0) the trunk
you are programming from the
SMDR printout. Refer to Program
35-01 and 35-02 for SMDR
printout options.
For ANI/DNIS, the following
additional setting is
recommended: Behind PBX = 0
(Stand Alone).
For each extension, enter 1 if
extension calls should appear on
SMDR report. Enter 0 if extension
calls should not appear on SMDR
report.
Station Message Detail Recording
UNIVERGE SV8100
Assigned Data
0.0.0.0 ~
126.255.255.254
128.0.0.1 ~
191.254.255.254
192.0.0.1 ~
223.255.255.254
(default =
192.168.0.10)
0~65535
default:
External Device 1 (CTI
Server) = 0
External Device 2
(ACD MIS) = 4000
External Device 5
(SMDR Output) = 0
External Device 6 (DIM
Output) = 0
External Device 11
(O&M Server) = 8010
1~255 (seconds)
(default = 30)
0 = No Print Out
1 = Prints Out
(default = 0)
0 = Stand Alone
(Trunk)
1 = Behind PBX (PBX)
2 = Not Used
3 = CTX assume 9
(default = 0)
0 = Do not print on
SMDR report
1 = Include on SMDR
report
(default = 1)