NEC UNIVERGE SV8100 Features & Specifications Manual page 28

Issue 5.0
Guide to Feature Programming
Program
Number
20-01-06
Operation
To set the alarm:
1. At the multiline terminal, press Speaker.
- OR -
At the single line telephone, lift the handset.
2. Dial 827.
3. Dial alarm type (1 or 2).
Alarm 1 sounds only once. Alarm 2 sounds each day at the preset time.
.
4. Dial the alarm time (24-hour clock).
For example, for 1:15 PM dial 1315.
.
A confirmation tone is heard if the alarm has been set. If the alarm was not set, an error tone is heard instead.
5. At the multiline terminal, press Speaker to hang up.
- OR -
At the single line telephone, hang up.
1 - 18
Program Name
System Options – Alarm
Duration
Description/Comments
Set the duration of the Alarm
signal.
UNIVERGE SV8100
Assigned Data
0~64800 seconds
(default = 30 seconds)
Alarm