System Hold - NEC UNIVERGE SV8100 Features & Specifications Manual

UNIVERGE SV8100
Program
Number
20-11-10
20-11-13
20-17-01
24-01-01
24-01-02
24-01-03
24-01-04
24-01-05
Operation

System Hold

To place an outside call on System Hold:
Press Hold.
Hold
Program Name
Class of Service Options (Hold/
Transfer Service) – Group Hold
Answer
Class of Service Options (Hold/
Transfer Service) – Operator
Transfer After Hold Callback
Operator Extension – Operator's
Extension Number
System Options for Hold – Hold
Recall Time
System Options for Hold – Hold
Recall Callback Time
System Options for Hold –
Exclusive Hold Recall Time
System Options for Hold –
Exclusive Hold Recall Callback
Time
System Options for Hold –
Forced Release of Held Call
Description/Comments
In an extension Class of Service,
enable (1) or disable (0) an
extension ability to pick up a call
placed on Group Hold (Service
Code 862).
Turns Off or On an extension
ability to have a call which recalls
from Hold transfer to the operator.
Define the extension numbers
which are to be used by operators.
Set the Hold Recall Time. A call
on Hold recalls the extension that
placed it on Hold after this time.
Set the Hold Recall Callback Time.
A trunk recalling from Hold rings
an extension for this time.
Set the Exclusive Hold Recall
Time. A call on Exclusive Hold
recalls the extension that placed it
on Hold after this time.
Set the Hold Recall Time. A trunk
recalling from Hold rings an
extension for this time. If still
unanswered, the call changes to
System Hold.
Set the Forced Release of Held
Calls interval. If enabled in
Program 14-01-16, the system
disconnects a call if on Hold longer
than this interval.
Issue 5.0
Assigned Data
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
Up to eight digits
(default = 101)
0~64800 (seconds)
(default = 90 seconds)
0~64800 (seconds)
(default = 30 seconds)
0~64800 (seconds)
(default = 90 seconds)
0~64800 (seconds)
(default = 30 seconds)
0~64800 (seconds)
(default = 1800
seconds)
1 - 571