NEC UNIVERGE SV8100 Features & Specifications Manual page 931

UNIVERGE SV8100
3. Dial the System Speed Dialing storage code.
Unless you preselect, Trunk Group Routing selects the trunk for the call. The system may optionally select a
.
specific Trunk Group for the call.
If you have a DSS Console, you may be able to press a DSS Console key to chain to a stored number.
.
To store a System Speed Dialing number under a Programmable Function Key:
1. At multiline terminal, press Speaker.
2. Dial 851.
3. Press the key where the number is to be stored.
4. Dial 27.
5. Dial System Speed Dial Bin number to put under the key.
6. Press Speaker to hang up.
To dial a System Speed Dialing number under a Programmable Function Key:
1. At the multiline terminal, press Speaker.
2. Press the key, which has the stored number to be dialed.
The number seizes an outside line and dials out.
.
To dial a Group Speed Dialing number:
1. Go off-hook.
2. Press Redial.
- OR -
3. Press the Group Speed Dialing key (Program 15-07-01 or SC 851: 28).
To preselect, press a line key in step 1 (instead of Speaker) before pressing Redial or Speed Dialing key.
.
4. Dial the Group Speed Dialing code.
The stored number dials out.
.
Unless you preselect, Trunk Group Routing selects the trunk for the call.
.
If you have a DSS Console, you may be able to press a DSS Console key to chain to a stored number.
.
To check your stored Speed Dialing numbers (display telephone only):
1. Press the Help key.
Speed Dial – System/Group/Station
Issue 5.0
1 - 921