NEC UNIVERGE SV8100 Features & Specifications Manual page 50

Issue 5.0
Program
Number
15-07-01
15-12-01
15-12-02
33-01-01
33-02-01
Operation
To call an ACI software port:
1. Press the Speaker.
1 - 40
Program Name
Programmable Function Keys
Conversation Recording
Destination for Extensions – ACI
Recording Destination
Extension Number
Conversation Recording
Destination for Extensions – ACI
Automatic Recording for
Incoming Calls
ACI Port Type Setup – ACI Type
ACI Department Calling Group –
Group Number
Description/Comments
If required, program and ACI
Conversation Record Key (code
69 + 0). This key allows an
extension user to press the key to
manually record a call to the ACI
Use this option to assign the ACI
Call Recording destination on a
per extension basis. The
destination can be an ACI port
extension number (assigned in
Program 11-06) or an ACI
Department Group pilot number
(assigned in Program 11-08). If
destinations are assigned in
Program 14-09 and Program
15-12, the destination in Program
15-12 is followed.
Determine whether or not an
extension should be automatically
recorded when an incoming call is
received.
Set each ACI software port for
input (1) or input/output (2). Use
input ports for Music on Hold
sources. Use output ports for
External Paging/ringer control.
Assign ACI software ports to ACI
Department Groups. This lets ACI
callers connect to ACI software
ports by dialing the group pilot
number (set in Program 11-08).
Analog Communications Interface (ACI)
UNIVERGE SV8100
Assigned Data
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
* *
00 ~ 99
(Appearance Function
Code) (Service Code
852 by default)
Extension Number =
Maximum eight digits
(default not assigned)
0 = Off
1 = On
(default = 0)
ACI Ports: 1~96
ACI Types:
0 = None
1 = MOH/BGM (Input)
2 = External Audio
Port (Input/Output
(default = 2)
ACI Ports: 1~96
ACI Groups: 1~16
Default:
ACI Port/Group/Priority
01/ 1/ 1
02/ 1/ 2
: / :/ :
96/ 1/ 96