NEC UNIVERGE SV8100 Features & Specifications Manual page 47

UNIVERGE SV8100
Physical Ports and Software Ports
Each PGD(2)-U10 ADP consists of a physical port for connection to the telephone system and two logical
ports. For programming purposes, the ports are also called software ports. The physical port connects to
a station position on a ESI ETU. During installation, the first PGD(2)-U10 ADP you set up is physical port 1;
the second PGD(2)-U10 ADP is physical port 2, etc. Each PGD(2)-U10 ADP has two software ports,
which are numbered independently of the physical ports. Normally, the first PGD(2)-U10 ADP set up has
software ports 1~2; the second PGD(2)-U10 ADP has software ports 3~4, etc. There are a total of 96
software ports (48 PGD(2)-U10 ADPs x 2 ports each). During programming, you assign ACI extension
numbers and Department Group options to PGD(2)-U10 ADP software ports, not physical ports. During
installation, you connect equipment to the jacks on the PGD(2)-U10 ADP that correspond to the software
port. Refer to the UNIVERGE SV8100 System Hardware Manual for installation details.
Conditions
ACD agents who are logged on can be recorded.
When ACI software ports are set to be a Background Music music source, it only plays to a
speaker, not a multiline telephone.
An extension cannot have Hotline keys for ACI software ports. Music on Hold ACI software
ports can be Music on Hold music sources.
An extension can have One-Touch Keys for ACI software ports. The gives the extension
user:
One-Touch access to external music
o
One-Touch External Paging
o
One-Touch loud ringer control
o
ACI software ports can provide External Paging with control, independent of the External
Paging circuits on the CD-CP00. The PGD(2)-U10 ADP can be connected to any DLC port.
The devices connected to the PGD(2)-U10 ADP must be compatible with the specifications
below. Refer to the UNIVERGE SV8100/SV8300 System Hardware Manual for installation details.
Analog Communications Interface (ACI)
PGD(2)-U10 ADP
/ACI Interface Specifications
Relay Contacts
Maximum Contact Ratings
Minimum Application Load
Audio/Music Input
Input Impedance
30 V DC @ 60 mA
90 V AC @ 10 mA
1 V DC @ 1 mA
47 K Ohms @ 1 K Hz
Issue 5.0
1 - 37