NEC UNIVERGE SV8100 Features & Specifications Manual page 985

UNIVERGE SV8100
Program
Number
24-02-07
24-02-10
25-07-07
25-07-08
Method C – Tandem Trunking on Hang up
Program
Number
14-01-04
14-01-05
14-01-13
20-06-01
Tandem Trunking (Unsupervised Conference)
Program Name
System Options for Transfer –
Trunk-to-Trunk Transfer Release
Warning Tone
System Options for Transfer –
Disconnect Trunk-to-Trunk
System Timers for VRS/DISA –
Long Conversation Warning
Tone Time
System Timers for VRS/DISA –
Long Conversation Disconnect
Time
Program Name
Basic Trunk Data Setup –
Transmit Gain Level for
Conference and Transfer Calls
Basic Trunk Data Setup –
Receive Gain Level for
Conference and Transfer Calls
Basic Trunk Data Setup –
Trunk-to-Trunk Transfer
Class of Service for Extensions
Description/Comments
This timer starts when a trunk
begins talking with another trunk
(for example: Trunk-to-Trunk
Transfer, outgoing from trunk,
Tandem Trunking).
This timer starts after the
Trunk-to-Trunk warning tone is
heard.
Determine the time a DISA caller
or any trunk-to-trunk (such as
Tandem Trunking) conversation
can talk before the Long
Conversation tone is heard.
Determine the time the system
waits before disconnecting a DISA
or any trunk-to-trunk (such as
Tandem Trunking) call after the
Long Conversation tone is heard.
Description/Comments
Select the Transmit CODEC gain
level used by the trunk when it is
part of an Unsupervised
Conference.
Select the Receive CODEC gain
level used by the trunk when it is
part of an Unsupervised
Conference.
For each trunk, enter 1 to enable
loop supervision.
Assign a Class of Service (1~15)
to an extension.
Issue 5.0
Assigned Data
0~64800 (seconds)
(default = 1800
seconds)
0~64800 (seconds)
(default = 0 seconds)
0~64800 (seconds)
(default = 3600
seconds)
0~64800 (seconds)
(default = 10 seconds)
Assigned Data
1~63(-15.5dB ~
+15.5dB in 0.5dB
intervals)
[default = 32 (0dB)]
1~63(-15.5dB ~
+15.5dB in 0.5dB
intervals)
[default = 16 (-8dB)]
0 = Disable
1 = Enable
(default = 1)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
All extension port =
Class 1
1 - 975