NEC UNIVERGE SV8100 Features & Specifications Manual page 567

UNIVERGE SV8100
Guide to Feature Programming
Program
Number
11-11-15
11-11-16
11-12-06
15-02-16
20-02-12
20-06-01
20-08-10
20-09-05
Handsfree Answerback/Forced Intercom Ringing
Program Name
System Numbering – Enable
Handsfree Incoming Intercom
Calls
System Numbering – Force
Ringing of Incoming Intercom
Calls
Service Code Setup (for Service
Access) – Switching of Voice
Call and Signal Call
Multiline Telephone Basic Data
Setup – Handsfree Operation
System Options for Multiline
Telephones – Forced Intercom
Ring (ICM Call Type)
Class of Service for Extensions
Class of Service Options
(Outgoing Call Service) – Signal/
Voice Call
Class of Service Options
(Incoming Call Service) – Signal/
Voice Call
Description/Comments
If required, change the service
code used for setting an extension
to voice announce for incoming
ICM calls.
If required, change the service
code used for setting an extension
to forced ringing for incoming ICM
calls.
If required, change the service
code used for toggling an outgoing
ICM call between a voice call and
signal call.
Enable (1) or disable (0) ability of
an extension to use the
speakerphone on outside calls.
When disabled, users can hear
the conversion, but cannot
respond handsfree.
Use this option to enable (1) or
disable (0) Forced Intercom
Ringing. If enabled, incoming
Intercom calls normally ring. If
disabled, Intercom calls
voice-announce.
Assign a Class of Service (1~15)
to an extension.
In an extension Class of Service,
enable (1) or disable (0) an
extension ability to toggle between
Handsfree Answerback and
Forced Intercom Ringing for
outgoing Intercom calls (dial 1 or
Service Code 812).
Turn off or on an extension ability
to enable Handsfree Answerback
or Forced Intercom Ringing for
their incoming Intercom calls.
Issue 5.0
Assigned Data
MLT
(default = 821)
MLT
(default = 823)
MLT, SLT
(default = 812)
0 = Disable
1 = Enable
(default = 1)
0 = Disable (Voice)
1 = Enable (Signal)
(default = 0)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension
ports = Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
1 - 557