NEC UNIVERGE SV8100 Features & Specifications Manual page 278

Issue 5.0
Program
Number
20-11-23
20-11-24
20-11-25
20-11-27
20-12-02
20-12-03
20-13-01
20-13-02
20-13-03
20-13-04
1 - 268
Program Name
Class of Service Options (Hold/
Transfer Service) – CAR/VE Call
Forward Set/Cancel
Class of Service Options (Hold/
Transfer Service) – Trunk Park
Hold Mode
Class of Service Options (Hold/
Transfer Service) – Transfer Park
Call
Class of Service Options (Hold/
Transfer Service) – Call Park
Automatically Search
Class of Service Options
(Charging Cost Service) –
Advice of Charge
Class of Service Options
(Charging Cost Service) – Cost
Display (TTU)
Class of Service Options
(Supplementary Service) – Long
Conversation Alarm
Class of Service Options
(Supplementary Service) – Long
Conversation Cutoff (Incoming)
Class of Service Options
(Supplementary Service) – Long
Conversation Cutoff (Outgoing)
Class of Service Options
(Supplementary Service) – Call
Forward/DND Override (Bypass
Call)
Description/Comments
In an extension Class of Service,
turn On (1) or Off (0) the ability to
set and cancel Call Forwarding for
a CAR or Virtual Extension.
Set the hold type when a trunk call
is put on hold by an extension.
Turn on or off an extension user
ability to transfer a parked call.
Use this option to turn On (1) or
Off (0) using the Call Park
Automatically Search option.
ISDN-AOC
This option turns off (0) or on (1) a
DISA or tie trunk caller's ability to
dial 9 for Trunk Group Routing or
Automatic Route Selection.
ISDN billing information
Turns Off (0) or On (1) the
Warning Tone for Long
Conversation (not for single line
telephones).
Turn off or on an extension user
ability to use Long Conversation
Cutoff for incoming calls.
Turn off or on an extension user
ability to use Long Conversation
Cutoff for outgoing calls.
Turn On or Off the ability to use
Call Forwarding/DND Override.
UNIVERGE SV8100
Assigned Data
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Non Exclusive Hold
(Off)
1 = Exclusive Hold
(On)
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
Class of Service