NEC UNIVERGE SV8100 Features & Specifications Manual page 787

Hide thumbs Also See for UNIVERGE SV8100:

Table of Contents

UNIVERGE SV8100

Personal Park at a Co-Worker's Extension

The Personal Park feature allows an extension user to place an outside call, which is on hold, on

Personal Park at a co-worker's extension after placing an intercom call. This feature is available for

keysets, SLTs, IP terminals and IP DECT terminals.

If the called extension has Call Forwarding enabled, the outside call is parked at the

originator's extension instead.

This feature is not available when calling a Department Group's pilot number.

If an extension user has a call in Personal Park and the terminal is unplugged, the Personal

Park is cancelled and the held caller hears a busy tone.

This feature does not work when calling a Networked or virtual extension.

If an extension has currently placed a trunk in another extension's Personal Park, the

feature cannot be used for a new trunk until the initial trunk has been picked up.

A Personal Park Programmable Function Key or the Soft Key must be used to park the call

in a co-worker's park. This operation cannot be done using a service code.

An extension can park a call in any Park Orbit. However, an extension can only pick up a

call Parked by a member of its own Park group (see Program 24-03).

If an extension is not allowed access to trunks in the Access Maps (Program 14-07 and

Program 15-06), calls in Park and on Hold can be blocked.

Default Setting

System Availability

All Terminals

Show Quick Links

Table of Contents