Dial Action Table - NEC univerge sv8100 User Manual

Description
The Dial Action Table defines the dialing options for the Call Routing Mailbox chosen
by the active Answer Table, which in turn provides those dialing options to Automated
Attendant callers. InMail provides 16 Dial Action Tables (32 from v8.00 software). The
Dial Action Table is an integral part of the Automated Attendant. The Automated
Attendant can automatically answer the telephone system's incoming calls, play an
Instruction Menu message, and provide dialing options to callers.
With v8.00 software or higher the number of Dial Action Tables available has been
increased to 32.
There are 3 major Automated Attendant components:
InMail System Guide
Answer Tables
The Answer Table determines how the Automated Attendant answers outside
calls on each trunk, according to the time of the day and day of the week that
the call is ringing. The Answer Table divides the time of day and day of the week
into individual schedules, which in turn assign a Call Routing Mailbox to each
call. When a specific schedule is not in effect, the Answer Table uses its Default
Mailbox to determine routing.
By default, all trunks use Answer Table 1. Answer Table 1 has a single schedule that runs
.
Monday through Friday from 8:30AM to 5:00PM.
Routing Mailbox
A Call Routing Mailbox is a mailbox associated with an individual Answer Table
schedule or the Default Mailbox. It specifies which dialing options (Dial Action
Table) are available to callers. It also provides the Instruction Menu to callers
which typically greets the callers and describes the dialing options.
By default, Answer Table 1 has a single schedule that runs Monday through Friday from
.
8:30AM to 5:00PM. This schedule and the Default Mailbox both use Call Routing
Mailbox 1.

Dial Action Table

After the Automated Attendant answers, the Dial Action Table provides the
dialing options to callers. Each digit a caller can dial is assigned a specific action
(function) in the Dial Action Table. The dial action used depends on the setting in
the active Call Routing Mailbox, which in turn depends on the Answer Table
setup.
By default, Call Routing Mailbox 1 uses Dial Action Table 1.
.
Dial Action Table
Issue 7.00
2 - 107