NEC UNIVERGE SV8100 Features & Specifications Manual page 746

Issue 5.0
Guide to Feature Programming
Program
Number
11-12-03
11-16-04
15-02-12
15-07-01
20-06-01
20-09-07
20-13-05
20-13-06
1 - 736
Program Name
Service Code Setup (for Service
Access) – Override (Off-Hook
Signaling)
Single Digit Service Code Setup
– Intercom Off-Hook Signaling
Multiline Telephone Basic Data
Setup – Off-Hook Ringing
Programmable Function Keys
Class of Service for Extensions
Class of Service Options
(Incoming Call Service) – Call
Queuing
Class of Service Options
(Supplementary Service) –
Intercom Off-Hook Signaling
Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
Description/Comments
Assign a service code (809 by
default) to be used for Off-Hook
Signaling Override.
Assign a one-digit service code to
be used for Off-Hook Signaling.
For each extension, set Off-Hook
Ringing type: 0 (muted), 1 (none),
3 (beep in speaker), 4 (beep in
handset), 5 (Speaker & Handset
Beep). DID, DNIS and DIL trunks
can use any of the four options -
normal/ring group trunks can only
use options "0" or "1".
Assign a function key for Off-Hook
Signaling (code 33).
Assign a Class of Service (1~15)
to an extension.
Turn Off (0) or On (1) an extension
ability to have calls queued if a call
rings the extension when it is busy.
. Must be set to 1 to enable
automatic Off-Hook
Signaling.
Turn On (1) or Off (0) the ability of
an extension to receive Off-Hook
Signals.
Allows a busy extension ability to
automatically (1) or manually (0)
receive Off-Hook Signals.
UNIVERGE SV8100
Assigned Data
MLT, SLT
(default =809)
(default not assigned)
0 = Muted Off-Hook
Ringing
1 = No Off-Hook
Ringing
2 = Not Used
3 = Beep in Speaker
(SP)
4 = Beep in Handset
(HS)
5 = Speaker & Handset
Beep
(default = 5)
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
* *
00 ~ 99
(Appearance Function
Code) (Service Code
852 by default)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
All extension port =
Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
Off-Hook Signaling