NEC UNIVERGE SV8100 Features & Specifications Manual page 756

Issue 5.0
Related Features
Attendant Call Queuing
Guide to Feature Programming
Program
Number
20-01-01
20-17-01
20-35-01
20-36-01
20-37-01
20-38-01
Operation
Refer to the individual features for operation.
1 - 746
Program Name
System Options – Operator
Access Mode
Operator Extension – Operator's
Extension Number
Extension's Operator Setting
Trunk's Operator Setting
Operator Extension Group Setup
Operator Group Setting
Description/Comments
Use this program to set up priority
of a call when calling an operator
telephone (0 = Step, 1 = Circular).
Designate an extension an
operator. When an extension user
dials 0 or 9 (defined by Program
11-01, Type 5), calls go to the
operator selected in this program.
If you do not assign an extension
in Program 90-11-01, system
alarms appear on the extension
assigned in this option.
Assign an extension to an
operator group.
Allows the user to select Operator
Group per trunk.
Define the initial operator
extension in the operator group.
Use this program to set up priority
of a call when calling an operator
telephone.
UNIVERGE SV8100
Assigned Data
0 = Step
1 = Circular
(default = 0)
Up to eight digits
(default not assigned)
(Input: 0~15)
(Input: 0~15)
(0 = Not assigned)
(default = 0)
Up to eight Digits
(default not assigned)
0 = Step
1 = Circular
(default = 0)
Operator