NEC UNIVERGE SV8100 Features & Specifications Manual page 989

UNIVERGE SV8100
Program
Number
20-07-11
24-02-07
24-02-10
24-04-01
25-07-07
25-07-08
Trunk Disconnect Continue/Disconnect Codes
Program
Number
14-01-25
Tandem Trunking (Unsupervised Conference)
Program Name
Class of Service Options
(Administrator Level) – Forced
Trunk Disconnect (analog trunk
only)
System Options for Transfer –
Trunk-to-Trunk Transfer Release
Warning Tone
System Options for Transfer –
Disconnect Trunk-to-Trunk
Automatic Trunk-to-Trunk
Transfer Target Setup
System Timers for VRS/DISA –
Long Conversation Warning
Tone Time
System Timers for VRS/DISA –
Long Conversation Disconnect
Time
Program Name
Basic Trunk Data Setup –
Continued/Discontinued
Trunk-to-Trunk Conversation
Description/Comments
Turns Off (0) or On (1) an
extension to use Forced Trunk
Disconnect. This allows the
extension to disconnect an
Unsupervised Conference in
progress.
This timer starts when a trunk
begins talking with another trunk
(for example: Trunk-to-Trunk
Transfer, outgoing from trunk,
Tandem Trunking).
This timer starts after the
Trunk-to-Trunk warning tone is
heard.
Assign the Speed Dialing number
(0~1999) to be used as the
destination for the Trunk-to-Trunk
Transfer.
Determine the time a DISA caller
or any trunk-to-trunk (such as
Tandem Trunking) conversation
can talk before the Long
Conversation tone is heard.
Determine the time the system
waits before disconnecting a DISA
or any trunk-to-trunk (such as
Tandem Trunking) call after the
Long Conversation tone is heard.
Description/Comments
When Program 24-02-10 is set to
disconnect a trunk after the
defined time, determine whether
or not a user should have the
ability to use the continue/
disconnect code.
Issue 5.0
Assigned Data
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
0~64800 (seconds)
(default = 1800
seconds)
0~64800 (seconds)
(default = 0 seconds)
Trunks: 1~200
0~1999
(default = 1999
0~64800 (seconds)
(default = 3600
seconds)
0~64800 (seconds)
(default = 10 seconds)
Assigned Data
Entries:
0 = Disable
1 = Enable
(default = 0)
1 - 979