Hopper Assembly - Canon iR C2880 Series Service Manual

Chapter 7
- 2 connectors [2]
- 4 screws [3]
[2]
F-7-69

7.9.4 Hopper Assembly

7.9.4.1 Before Removing the Hopper Supply Unit
iR C3380i / iR C3380 / iR C2880i / iR C2880 / iR C3580 / iR C3580i / iR
C3080 / iR C3080i
1) Remove the hopper drive assembly. (page 10-20)[Removing the Hopper
Drive Unit]
7.9.4.2 Removing the Hopper Supply Unit
iR C3380i / iR C3380 / iR C2880i / iR C2880 / iR C3580 / iR C3580i / iR
C3080 / iR C3080i
1) Remove the 4 supply drive shaft [1].
- 1 claw each [2]
[2]
F-7-70
2) Remove the 3 toner cartridge guide [1].
- 6 screws [2]
[1]
F-7-71
7-46
[2]
[1]
[3]
0014-1276
0014-1277
[1]
[2]
3) Remove the screw [1].
F-7-72
4) Pull out the hopper supply unit [1].
- 4 screws [2]
[2]
F-7-73
7.9.5 Developing Motor (Bk/Y/M/C)
7.9.5.1 Before Removing the Developing Motor
iR C3380i / iR C3380 / iR C2880i / iR C2880 / iR C3580 / iR C3580i / iR
C3080 / iR C3080i
1) Detach the upper rear cover. (page 10-16)[Detaching the Upper Rear
Cover]
2) Detach the lower rear cover. (page 10-17)[Detaching the Lower Rear
Cover]
3) Detach the left lower cover. (page 10-16)[Detaching the Left Lower
Cover]
4) Remove the all-night power supply PCB. (page 10-26)[Detaching the
All-Night Power Supply PCB]
5) Remove the printer power supply assembly. (page 10-22)[Detaching the
Printer Power Supply Assembly]
7.9.5.2 Removing the Developing Motor
iR C3380i / iR C3380 / iR C2880i / iR C2880 / iR C3580 / iR C3580i / iR
C3080 / iR C3080i
1) Remove the developing motor [1].
- 2 connectors [2]
- 4 screws [3]
[3]
F-7-74
[1]
[2]
[1]
0014-2629
0014-2628
[2]
[1]