Removing The Hopper (M) - Canon imageRUNNER ADVANCE C5255 Series Service Manual

4
Parts Replacement and Cleaning > Image Formation System > Removing the Hopper (M) > Procedure
7) Remove the Toner Container Front Inner Cover.
• 1 connector
• 1 wire saddle
• 4 screws (RS)
x4
4 Parts Replacement and Cleaning > Image Formation System > Removing the Hopper (M) > Procedure

Removing the Hopper (M)

■ Preparations
1) Release the lock of Toner Container. (By service mode)
2) Open the Front Cover, the Right Lower Cover and Right Upper Cover.(Refer to page 4-104)
3) Remove the ITB Unit.(Refer to page 4-105)
4) Remove the Process Unit.(Refer to page 4-132)
Connector 5) Remove the Color Drum Heater. (When the option is installed)(Refer to page 1-1)
6) Remove the Toner Container Front Inner Cover.(Refer to page 4-154)
■ Procedure
Wire saddle
1) Remove the Toner Tray.
• 1 screw (M4 binding)
F-4-262
4-156
F-4-263
4-156