Hopper Assembly; Mounting The Drum Heater - Canon iR6570 series Service Manual

Chapter 7
3) Disconnect the connector [1], and detach the drum heater [2].
[1]

7.10.8.10 Mounting the Drum Heater

Mount the photosensitive drum by reversing the steps used to remove it;
however, be sure not to soil or scratche the drum and not to trap the cable
of the drum heater.

7.10.9 Hopper Assembly

7.10.9.1 Removing the Primary Fan Duct
1) Open the front cover.
2) Open the toner supply cover.
3) Remove the toner supply cover [2] using the two screws [1].
[1]
4) Remove the connector cover [2] using the screw [1].
[2]
5) Remove the two screws [1] and the connector [2], and pull out the
primary fan duct [3].
7-46
[2]
F-7-142
0009-5611
0009-4950
[1]
[2]
F-7-143
[1]
F-7-144
7.10.9.2 Removing the Hopper Assembly
1) Open the manual feed tray cover [1], remove the screw [2] from the
door tape, and fully open the manual feed tray cover [1].
2) Remove the mounting screw [1], and push the developing locking
assembly [2] in the direction of the arrow to detach.
[1]
3) Displace the toner bottle.
4) Dicconnect the connector [1], remove the 5 screws [2], and remove
the hopper assembly [3].
[2]
[3] [1]
F-7-145
0009-4951
[2] [1]
F-7-146
[2]
F-7-147