Ending Service Mode; Backing Up Service Mode - Canon iR2200 Service Manual

Hide thumbs Also See for iR2200:

Table of Contents

1.3 Ending Service Mode

Press the Reset key once to return to the Service Mode Initial screen (F05-101-03).

Press the Reset key twice to end service mode and return to the User screen (standard).

If you have used service mode (ADJUST, FUNCTION, OPTION), be sure

to turn off and then on the main power switch after ending service mode.

At the factory, each machine is adjusted, and its adjustment settings are recorded on the

service label [1] (inside the service book case behind the front cover).

If you have cleared the RAM and replaed the PCB, the settings under ADJUST and OP-

TION will all return to the factory settings. Be sure to enter the settings indicated on the ser-

vice label. You can print out the settings stored in the machine in service mode:

COPIER>FUNCTION>MISC-P>P-PRINT. In addition, you can obtain a new service label

using service mode: COPIER>FUNCTION>MISC-P>LBL-PRINT.

2000 2000 2000 2000

CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001

CHAPTER 5 SERVICE MODE

Table of Contents

Ir2800 Ir3300