Show Rmon History - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

RMON C
OMMANDS

SHOW RMON HISTORY

show rmon history
Overview Use this command to display the parameters specified on all the currently defined
RMON history collections on the device.
NOTE
shown.
Syntax show rmon history
Mode User Exec and Privileged Exec
Output Figure 44-2: Example output from the show rmon history command
NOTE
interfaces:
•
•
•
•
•
•
•
•
•
•
•
•
613-50157-01 Rev C
: Only the history for switch port interfaces, not for VLAN interfaces, can be
awplus#sh rmon history
history index = 56
data source ifindex = 4501
buckets requested = 34
buckets granted = 34
Interval = 2000
Owner Andrew

history index = 458
data source ifindex = 5004
buckets requested = 400
buckets granted = 400
Interval = 1500
Owner trev
========================================================
: The following etherStats counters are not currently available for Layer 3
etherStatsBroadcastPkts
etherStatsCRCAlignErrors
etherStatsUndersizePkts
etherStatsOversizePkts
etherStatsFragments
etherStatsJabbers
etherStatsCollisions
etherStatsPkts64Octets
etherStatsPkts65to127Octets
etherStatsPkts128to255Octets
etherStatsPkts256to511Octets
etherStatsPkts512to1023Octets
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
1644