Table of Contents
Advertisement
System Start-up
Log on to the Computer -
1.
will appear. It already has "Administrator" as the user name. Type in
the password and press
that below; press a key to continue.
Figure 14
Start-up Warning Dialog Box
Configure the network
2.
the network must be configured. Have your local systems
administrator or IT specialist perform the required network protocol
settings as described in the Site Prep Guide (N7200-90049).
5DX Logon
3.
press
Enter.
Start-up
4.
enter key (or select the letter shown in yellow) to select:
Access > Startup > Automatic Startup.
NOTE
If you go too far into a menu, use the Esc key to back out one
level from the current menu item.
Agilent 5DX Installation
Press Ctrl Alt Del and the login screen
Enter
W A R N I N G
Run Automatic Startup for Proper
Operation!
Press Any Key to Continue
- Immediately after logging on the first time,
- A box with
Enter your name
- In the system configuration window, use the arrow and
. You will see a dialog box appear like
comes up. Type
and
S
System
27
Advertisement
Table of Contents
