Table of Contents
Advertisement
Status tab
The Status tab shows the current state of both trays.
a run. The Status tab is also the main application screen which enables you to
select and load methods, to start and stop them. The Status tab allows
processing and modification of run parameters interactively of a method that
is currently running.
Figure 11
Status Screen for Tray I
In a pull down menu for Method Selection you can select methods that are
present on the internal drive of the instrument or on the USB stick inserted at
the rear of the instrument. These methods can either be default methods
which were supplied with the instrument or user modified methods. See
Chapter
modification and saving can be done from the Method-tab.
The fractionation can be started after assembly of the tray with the start
button. This button changes subsequently to be the stop button. A
fractionation will start only if the instrument is ready, for example if the
platform temperature for the given method is reached. Readiness is given by
the status indicator. An idle instrument will start immediately the
OFFGEL User Manual
5,
page 65
for description of the default methods. Method
Operation
Status tab
Figure 11
shows Tray 1 in
1 Method selection
2 Start/Stop button
3 Tray corona
4 Status indicator
5 Method step
6 Instrument lock
7 Run parameters
8 Actual values
9 Actuals per lane
5
43
Advertisement
Table of Contents
Troubleshooting
