Alcatel-Lucent 7750 SR OS Service Manual page 968

VPRN Service Configuration Commands
Default
None — The SNMP community must be explicitly specified.
Parameters
community-name — Specify one or more SNMP community names.
version SNMP-version — Specify the SNMP version.
source-address
Syntax source-address
no source-address
Context config>service>vprn
Description
This command enters the context to specify the source address and application that should be used in
all unsolicited packets.
application
Syntax application app [ip-int-name|ip-address]
no application app
Context config>service>vprn>source-address
Description
This command specifies the source address and application.
Parameters
app — Specify the application name.
ip-int-name|ip-address — Specifies the name of the IP interface or IP address. If the string contains
static-route
Syntax [no] static-route{ip-prefix/mask | ip-prefix netmask} [preference preference] [metric metric]
[tag tag] [enable | disable] next-hop [ip-int-name | ip-address] [bfd-enable]
[no] static-route {ip-prefix/mask | ip-prefix netmask} [preference preference] [metric
metric] [tag tag] [enable | disable] indirect ip-address
[no] static-route {ip-prefix/mask | ip-prefix netmask} [preference preference] [metric
metric] [tag tag] [enable | disable] black-hole
Context config>service>vprn
Description
This command creates static route entries for network and access routes. To reduce entering
configurations manually, address aggregation should be applied where possible. When configuring a
static route, either next-hop, indirect, or black-hole must be configured.
The no form of the command deletes the static route entry. If a static route needs to be removed when
multiple static routes exist to the same destination, then as many parameters to uniquely identify the
static route must be entered.
Page 968
Values
v1, v2c, both
Values
telnet, ssh, traceroute, ping
special characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.
7750 SR OS Services Guide