Alcatel-Lucent 7750 SR OS Service Manual page 888

Configuring a VPRN Service with CLI
Table 1: CLI Commands to Configure VPRN Service Parameters (Continued)
Command
scheduler
scheduler-policy
Configure SAP ingress parameters
config>service>vprn>if>sap>ingress
filter
match-qinq-dot1p
qos
queue-override
queue
adaptation-rule
cbs
high-prio-only
mbs
rate
scheduler-override
scheduler
scheduler-policy
Configure VPRN interface SAP ATM parameters
config>service>vprn>interface>sap
atm
egress
traffic-desc
encapsulation
Page 888
Defines bandwidth controls that limit each child (other schedulers and
queues) associated with the scheduler.
Associates an existing scheduler policy to an egress scheduler used by
SAP queues associated with this multi-service customer site.
Associates an IP or MAC filter policy with an ingress SAP or IP
interface.
Configures filtering based on the p-bits in the top or bottom tag of a Q-
in-Q encapsulated Ethernet frame.
Associates a Quality of Service (QoS) policy with an ingress SAP or IP
interface.
Enables the context to configure override values for the specified SAP
egress QoS queue.
Specifies the ID of the queue whose parameters are to be overridden.
Overrides specific attributes of the specified queue's adaptation rule
parameters.
Overrides specific attributes of the specified queue's CBS parameters.
Overrides specific attributes of the specified queue's high-prio-only
parameters.
Overrides specific attributes of the specified queue's MBS parameters.
Overrides specific attributes of the specified queue's Peak Information
Rate (PIR) and the Committed Information Rate (CIR) parameters.
Specifies the set of attributes whose values have been overridden via
management on this virtual scheduler.
Defines bandwidth controls that limit each child (other schedulers and
queues) associated with the scheduler.
Associates an existing scheduler policy to an ingress scheduler used by
SAP queues associated with this multi-service customer site.
Enables access to the context to configure ATM-related attributes.
Configures egress ATM attributes for the SAP.
Assigns an ATM traffic descriptor profile to a given context (for
example a SAP).
Configures RFC 2684 encapsulation for an ATM PVCC delimited
SAP.
Description
7750 SR OS Services Guide
Page
1029
1021
1016
1016
1020
1023
1023
1023
1026
1026
1027
1028
1029
1029
1021
917
1005
1005
1006
1005