Table 1: CLI Commands to Configure Mirroring Parameters (Continued)
Command
hold-down-time
max-drop-count
message-length
timeout
no shutdown
7750 SR OS Services Guide
Configures the minimum time period the SDP will remain in the
operationally down state in response to SDP keepalive monitoring.
Configures the number of consecutive SDP keepalive failed request attempts
or remote replies that can be missed after which the SDP is operationally
downed.
Configures the size of SDP monitoring keepalive request messages.
Configures the time interval that the SDP waits before tearing down the
session.
Administratively enables the keepalive messages.
Description
Mirror Services
Page
98
98
99
99
79
Page 1315