Configuring A Local Mirror Service - Alcatel-Lucent 7750 SR OS Service Manual

Service router - mobile gateway
Hide thumbs Also See for 7750 SR OS:
Table of Contents

Advertisement

Common Configuration Tasks

Configuring a Local Mirror Service

To configure a local mirror service, the source and destinations must be located on the same router.
Note that local mirror source and mirror destination components must be configured under the
same service ID context.
The
mirror-source
mirrored at the source. For example, use the
{[egress][ingress]}
commands to capture (mirror) traffic that matches specific IP filter entry criteria which is
...]
ingressing and egressing a specific port. A filter must be applied to the SAP/interface if only
certain packets are to be mirrored.
Use the CLI syntax to configure one or more mirror source parameters:
The
mirror-dest
forwarding class, and the size of the packet. Use the following CLI syntax to configure mirror
destination parameters:
CLI Syntax: config>mirror
CLI Syntax: debug# mirror-source service-id
The following output displays an example of a local mirrored service. On ALA-A, mirror service
103 is mirroring egress and ingress traffic matching IP filter 2, entry 1, on port 2/1/24 and sending
the mirrored packets to SAP 2/1/25.
Example: *A:ALA-A>config>mirror# mirror-dest 103 create
Page 1324
commands are used as traffic selection criteria to identify traffic to be
and
commands are used to specify where the mirrored traffic is to be sent, the
mirror-dest service-id [type {ether|frame-relay|ppp|atm-
sdu}]
description string
fc fc-name
sap sap-id
slice-size bytes
no shutdown
ip-filter ip-filter-id entry entry-id [entry-id ...]
ingress-label label [label ...]
mac-filter mac-filter-id entry entry-id [entry-id ...]
port {port-id|lag lag-id} {[egress][ingress]}
sap sap-id {[egress][ingress]}
no shutdown
config>mirror>mirror-dest$ sap 2/1/25:0 create
config>mirror>mirror-dest>sap# exit
config>mirror>mirror-dest# no shutdown
config>mirror>mirror-dest# exit all
debug>mirror-source 103
port port {port-id|lag lag-id}
ip-filter ip-filter-id entry entry-id [entry-id
7750 SR OS Services Guide

Advertisement

Table of Contents
loading

Table of Contents