Alcatel-Lucent 7750 SR OS Service Manual page 595

sessions
Syntax sessions [group name] neighbor ip-address] [ port port-number] [association] [statistics]
Context show>service>id>gsmp
Description
This command displays GSMP sessions information.
Parameters
group — A GSMP group defines a set of GSMP neighbors which have the same properties.
name — Specifies a GSMP group name is unique only within the scope of the service in which it is
ip-address — Specifies the ip-address of the neighbor.
port — Specifies the neighbor TCP port number use for this ANCP session.
association — Displays to what object the ANCP-string is associated.
statistics — Displays statistics information about an ANCP session known to the system.
Description Show Sessions Neighbor Output — The following table describes show sessions neighbor
7750 SR OS Services Guide
defined.
Values
0 — 65535
output fields:
Label
The current state of the ANCP session.
State
The instance number of the ANCP session at the neighbor's side.
Peer Instance
The instance number of the ANCP session at our side.
Sender Instance
Peer Port The port number of the ANCP session at the neighbor's side.
The port number of the ANCP session at the local side.
Sender Port
The MAC address of the ANCP session at the neighbor's side.
Peer Name
The mac address of the ANCP session at the local side.
Sender name
The number of adjacency protocol message timeouts.
timeouts
The maximum allowed of the above timeouts before closing.
Max. Timeouts
The timer value for the neighbor peridodic adjacency protocol messages.
Peer Timer
Sender Timer The timer value for the local peridodic adjacency protocol messages.
The negotiated capabilties for the Established ANCP session (DTD :
Capabilities
dynamic topology discovery - OAM : operation and maintenance).
The configured local capabilities.
Conf Capabili-
ties
The DSCP bits for the IP messages used in the ANCP session.
Priority Mark-
ing
Local Addr. The destination IP address for this ANCP session.
Virtual Private LAN Services
Description
Page 595