Alcatel-Lucent 7750 SR OS Service Manual page 650

VPLS Service Configuration Commands
sdp-id — The SDP ID to be cleared.
vc-id — The virtual circuit ID on the SDP ID to be cleared.
lease-state
Syntax lease-state [no-dhcp-release]
lease-state ip-address ip-address [no-dhcp-release]
lease-state mac ieee-address no-dhcp-release
lease-state sap sap-id [no-dhcp-release]
lease-state sdp sdp-id:vc-id [no-dhcp-release]
Context clear>service>id>dhcp
Description
This command clears DHCP lease state information.
Parameters
no-dhcp-release — Specifies that the node will clear the state without sending the DHCP release
ip-address ip-address — Clears the DHCP IP address lease state information. The ip-address portion
mac ieee-address — Clears DHCP MAC address lease state information. The 48-bit MAC address
sap sap-id — Clears DHCP SAP lease state information.
Page 650
vci
dlci
Values
1 — 17407
Values
1 — 4294967295
message.
of the address command specifies the IP host address that will be used by the IP interface within
the subnet. This address must be unique within the subnet and specified in dotted decimal
notation. Allowed values are IP addresses in the range 1.0.0.0 – 223.255.255.255 (with support
of /30 subnets).
for the static ARP in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and
ff are hexadecimal numbers. Allowed values are any non-broadcast, non-multicast MAC and
non-IEEE reserved MAC addresses.
Values sap-id:
null
dot1q
qinq
atm
frame
cisco-hdlc slot/mda/port.channel
port-id
aps-id
bundle-type-slot/mda.bundle-num
1, 2, 5 — 65535
16 — 1022
[port-id | bundle-id | bpgrp-id | lag-id | aps-id]
[port-id | bundle-id | bpgrp-id | lag-id | aps-id]:qtag1
[port-id | bundle-id | bpgrp-id | lag-id]:qtag1.qtag2
[port-id | aps-id | bundle-id | bpgrp-id][:vpi/vci |vpi |vpi1.vpi2]
[port-id | bundle-id]:dlci
slot/mda/port[.channel]
aps-group-id[.channel]
aps keyword
group-id 1 — 64
bundle keyword
7750 SR OS Services Guide