Alcatel-Lucent 7750 SR OS Service Manual page 895

Table 1: CLI Commands to Configure VPRN Service Parameters (Continued)
Command
multihop
next-hop-self
passive
peer-as
preference
prefix-limit
remove-private
type
no shutdown
Configure VPRN RIP parameters
config>service>vprn# rip
authentication-key
authentication-type
check-zero
description
export
import
message-size
metric-in
metric-out
preference
receive
send
split-horizon
timers
7750 SR OS Services Guide
Configures the TTL value entered in the IP header of packets sent to an
EBGP peer multiple hops away.
Configures the group or neighbor to always set the NEXTHOP path
attribute to its own physical interface when advertising to an EBGP
peer.
Enables passive mode for the BGP group or neighbor.
Configures the autonomous system number for the remote peer. The
peer AS number must be configured for each configured peer.
Configures the route preference for routes learned from the configured
peer(s).
Configures the maximum number of routes BGP can learn from a peer.
Enables removing the private AS numbers from the AS Path before
advertising them to BGP peers.
Configures the BGP peer as type internal or external.
Administratively enables the BGP neighbor.
Sets the authentication password to be passed between RIP neighbors.
Defines the type of authentication to be used between RIP neighbors.
Enables checking for zero values in fields specified to be zero by the
RIPv1 and RIPv2 specifications.
Creates a text description for the RIP instance.
Specifies the export policies to be used to control routes advertised to
RIP neighbors.
Specifies the import policies to be used to control routes advertised
from RIP neighbors.
Sets the maximum number of routes per RIP update message.
Sets the metric added to routes that were received from a RIP neighbor.
Sets the metric added to routes that were exported into RIP and
advertised to RIP neighbors.
Sets the route preference assigned to RIP routes.
Configures the type(s) of RIP updates that will be accepted and
processed.
Specifies the type of RIP messages sent to RIP neighbors.
Enables the use of split-horizon.
Sets the values for the update, timeout, and flush timers.
Virtual Private Routed Network Services
Description Page
1076
1077
1077
1077
1078
1078
1079
1079
951
913
1101
1102
1102
952
1103
1103
1104
1104
1104
1105
1105
1106
1102
1106
Page 895