Alcatel-Lucent 7750 SR OS Service Manual page 1118

VPRN Service Configuration Commands
KeepAlive Information :
Admin State
Hello Time
Hello Timeout
Max Drop Count
Tx Hello Msgs
Associated LSP LIST :
Lsp Name
Admin State
Time Since Last Tran*: 01d07h36m
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:ALA-12#
sdp-using
Syntax sdp-using [sdp-id[:vc-id] | far-end ip-address]
Context show>service
Description
Display services using SDP or far-end address options.
Parameters
sdp-id — Displays only services bound to the specified SDP ID.
vc-id — The virtual circuit identifier.
far-end ip-address — Displays only services matching with the specified far-end IP address.
Output Show Service SDP Using X — The following table describes show service sdp-using output
fields.
Sample Output
Page 1118
: Disabled
: 10
: 5
: 3
: 0
: to-104
: Up
Values
1 — 17407
Values
1 — 4294967295
Default
Services with any far-end IP address.
Label
Svc ID
Sdp ID
Type
Far End
Oper State
Ingress Label
Egress Label
Oper State
Hello Msg Len
Unmatched Replies
Hold Down Time
Rx Hello Msgs
Oper State
The service identifier.
The SDP identifier.
Type of SDP: Spoke or Mesh
The far end address of the SDP
The operational state of the service
The label used by the far-end device to send packets to this device
in this service by this SDP.
The label used by this device to send packets to the far-end device
in this service by this SDP.
7750 SR OS Services Guide
: Disabled
: 0
: 0
: 10
: 0
: Down
Description