Alcatel-Lucent 7750 SR OS Service Manual page 1383

Service router - mobile gateway
Hide thumbs Also See for 7750 SR OS:
Table of Contents

Advertisement

Table 1: OAM Command Summary (Continued)
Command
VPLS MAC diagnostic commands
mac-ping
cpe-ping
mac-populate
mac-purge
mac-trace
IGMP snooping diagnostic commands
mfib-ping
SAA configuration commands
config>saa>test
description
jitter-event
latency-event
loss-event
shutdown/
no shutdown
VLL diagnostic commands
vccv-ping
7750 SR OS Services Guide
In-band and out-of-band utility to determine the existence of an egress SAP bind-
ing of a given MAC within a VPLS. Utility can also be used to display all opera-
tionally up SAPs in the VPLS service.
In-band and out-of-band utility to determine connectivity to a given IP address
within a VPLS.
Populates the FIB with an OAM-type MAC entry indicating the node is the
egress node for the MAC address and optionally floods the OAM MAC associa-
tion throughout the service.
Removes an OAM-type MAC entry from the FIB and optionally floods the
OAM MAC removal throughout the service.
In-band or out-of-band utility to determine the hop-by-hop path for a destination
MAC address within a VPLS.
In-band utility to determine the list of SAPs which egress a certain IP multicast
stream (identified by source unicast and destination multicast IP addresses)
within a VPLS. Utility can also be used to display all SAPs which are operation-
ally up in the VPLS service.
Description for this SAA test.
At the termination of an SAA test, both rising and falling thresholds are evalu-
ated versus the configuration and events generated as required.
At the termination of an SAA test, both rising and falling thresholds are evalu-
ated versus the configuration and events generated as required.
At the termination of an SAA test, both rising and falling thresholds are evalu-
ated versus the configuration and events generated as required.
In order to modify an existing test it must be shut down first. When a test is cre-
ated it is in shutdown mode until a no shutdown command is executed.
Configures a Virtual Circuit Connectivity Verification (VCCV) test.
Description
OAM and SAA
Page
1438
1418
1421
1440
1422
1426
1427
1427
1428
1395
1449
Page 1385

Advertisement

Table of Contents
loading

Table of Contents