Alcatel-Lucent 7750 SR OS Service Manual page 566

VPLS Service Configuration Commands
interface — Specifies matching SAPs with the specified IP interface.
ip-addr — The IP address of the interface for which to display matching SAPs.
ip-int-name — The IP interface name for which to display matching SAPs.
Output Show Service SAP — The following table describes show service SAP output fields:
Sample Output
A:ALA-701# show service sap-using
===============================================================================
Service Access Points
===============================================================================
PortId
-------------------------------------------------------------------------------
1/1/3
1/1/4
-------------------------------------------------------------------------------
Page 566
lag-id
qtag1
qtag2
vpi
vci
dlci
Values
1.0.0.0 — 223.255.255.255
Label
Port ID
Svc ID
SapMTU
I.QoS
I.MAC/IP
E.QoS
E.Mac/IP
A.Pol
Adm
Opr
cc-id 0 — 4094
lag-id
lag keyword
id 1 — 200
0 — 4094
*, 0 — 4094
NNI 0 — 4095
UNI 0 — 255
1, 2, 5 — 65535
16 — 1022
The ID of the access port where the SAP is defined.
The service identifier.
The SAP MTU value.
The SAP ingress QoS policy number specified on the ingress SAP.
The MAC or IP filter policy ID applied to the ingress SAP.
The SAP egress QoS policy number specified on the egress SAP.
The MAC or IP filter policy ID applied to the egress SAP
The accounting policy ID assigned to the SAP.
The desired state of the SAP.
The actual state of the SAP.
SvcId Ing. Ing.
QoS Fltr
10203041 1 ip4
10203042 1 none
7750 SR OS Services Guide
Description
Egr. Egr. Anti Adm
QoS Fltr Spoof
1 none none Up
1 ip4 none Up
Opr
Up
Up