Alcatel-Lucent 7750 SR OS Service Manual page 1312

Service router - mobile gateway
Hide thumbs Also See for 7750 SR OS:
Table of Contents

Advertisement

List of Commands
Table 1: CLI Commands to Configure Mirroring Parameters (Continued)
Command
slice-size
no shutdown
Configure mirror source parameters
debug>mirror
mirror-source
service-id
port
sap
ip-filter
ingress-label
mac-filter
no shutdown
Configure an SDP
config>service
sdp
far-end
lsp
path-mtu
no shutdown
keep-alive
hello-time
Page 1314
Enables mirrored frame truncation and configures the maximum portion of
the mirrored frame that will be transmitted to the mirror destination.
Administratively enables the mirroring instance.
Configures packet mirroring match criteria for a mirror service. This
configuration is not saved.
This is the mirror service ID which identifies the service. This service must
be created first in the mirror destination context.
Enables mirroring of traffic ingressing or egressing a port (Ethernet port,
SONET/SDH or TDM channel, Link Aggregation Group (LAG)).
Enables mirroring of traffic ingressing or egressing a SAP.
Enables mirroring of packets matching specific filter entries in an IP filter.
Enables mirroring of ingress MPLS frames based on the top-of-stack MPLS
label. Multiple labels can be defined simultaneously. The ingress label must
be active in the source router.
Enables mirroring of packets matching specific filter entries in a MAC filter.
Administratively enables the instance for source mirroring.
Creates a Service Distribution Point (SDP).
Configures the system IP address of the far-end destination 7750 SR for the
SDP that is terminating services.
Creates associations between one or more label switched paths (LSPs) and
an MPLS SDP. LSPs are configured in the
Configures the Maximum Transmission Unit (MTU) in bytes that the SDP
can transmit to the far-end 7750 SR without packet dropping the SDP-type
default path-mtu.
Administratively enables the SDP.
Configures SDP connectivity monitoring keepalive messages for the SDP
ID.
Configures the time period between SDP keepalive messages on the SDP-ID
for the SDP connectivity monitoring messages.
Description
config>router>mpls
7750 SR OS Services Guide
Page
1353
1343
1357
1357
1358
1359
1354
1354
1356
1343
90
93
94
context.
96
79
97
98

Advertisement

Table of Contents
loading

Table of Contents