Alcatel-Lucent 7750 SR OS Service Manual page 478

Service router - mobile gateway

Hide thumbs Also See for 7750 SR OS:

Table of Contents

VPLS Service Configuration Commands

config>service>vpls>sap>dhcp

This command enables DHCP Option 82 (Relay Agent Information Option) parameters processing

and enters the context for configuring Option 82 sub-options.

The no form of this command returns the system to the default.

action [dhcp-action]

config>service>vpls>sap>dhcp>option

This command configures the Relay Agent Information Option (Option 82) processing.

The no form of this command returns the system to the default value.

The default is to keep the existing information intact.

dhcp-action — Specifies the DHCP option action.

circuit-id [ascii-tuple | vlan-ascii-tuple]

config>service>vpls>sap>dhcp>option

When enabled, the router sends an ASCII-encoded tuple in the circuit-id suboption of the DHCP

packet. This ASCII-tuple consists of the access-node-identifier, service-id, and SAP-ID, separated by

replace — In the upstream direction (from the user), the Option 82 field from the router is

inserted in the packet (overwriting any existing Option 82 field). In the downstream direction

(towards the user) the Option 82 field is stripped (in accordance with RFC 3046).

drop — The DHCP packet is dropped if an Option 82 field is present, and a counter is

incremented.

keep — The existing information is kept in the packet and the router does not add any additional

information. In the downstream direction the Option 82 field is not stripped and is sent on

towards the client.

The behavior is slightly different in case of Vendor Specific Options (VSOs). When the keep

parameter is specified, the router will insert his own VSO into the Option 82 field. This will only

be done when the incoming message has already an Option 82 field.

If no Option 82 field is present, the router will not create the Option 82 field. In this in that case,

no VSO will be added to the message.

7750 SR OS Services Guide