OAM/SAA List of Commands
OAM/SAA List of Commands
Table 44
following task-oriented manner:
•
•
•
•
•
•
•
Table 1: OAM Command Summary
Command
LSP diagnostic commands
lsp-ping
lsp-trace
c
SDP diagnostic
ommands
sdp-mtu
sdp-ping
Service diagnostic commands
svc-ping
Page 1384
summarizes the commands and command uses. The command list is organized in the
LSP diagnostic commands
SDP diagnostic commands
Service diagnostic commands
VPLS MAC diagnostic commands
IGMP snooping diagnostic commands
SAA configuration commands
VLL diagnostic commands
In-band LSP ping utility to verify LSP connectivity.
In-band LSP traceroute command to determine the hop-by-hop path for an LSP.
Performs in-band MTU Path tests on an SDP to determine the largest path-mtu
supported on an SDP.
Tests an SDP for in-band uni-directional or round trip connectivity with a round
trip time estimate.
Tests a service ID for correct and consistent provisioning between two service
end points. The following information can be determined from svc-ping:
•
Local and remote service existence
•
Local and remote service state
•
Local and remote service type correlation
•
Local and remote customer association
•
Local and remote service-to-SDP bindings and state
•
Local and remote ingress and egress service label association
Description
7750 SR OS Services Guide
Page
1434
1436
1401
1442
1403