List Of Commands - Alcatel-Lucent 7750 SR OS Service Manual

Service router - mobile gateway

Hide thumbs Also See for 7750 SR OS:

Table of Contents

List of Commands

configuration level at which each command is implemented with a short command description.

The command list is organized in the following task-oriented manner:

Table 1: CLI Commands to Configure Mirroring Parameters

Configure mirror destination parameters

config>mirror

remote-source

7750 SR OS Services Guide

lists all the configuration commands to configure mirroring parameters, indicating the

Configure mirror destination parameters

Configure mirror source parameters

Configure an SDP

Creates a context for configuring a packet mirroring service. The mirroring

instance is set up like a service to allow the mirrored packets to be directed

over the core of the network and have a far end 7750 SR decode the mirror

encapsulation.

A unique service identification value which identifies this service in the

service domain.

A text description providing details of the mirroring instance.

Creates a Service Access Point (SAP) within a mirror destination service. A

sniffer can be attached to this port.

Binds an existing Service Distribution Point (SDP) to the mirror destination

service ID. SDPs are used only for remote mirroring.

The context to configure remote devices allowed to mirror traffic to this

device for mirror service egress.

Specifies a forwarding class for all mirrored packets transmitted to the

destination SAP or SDP overriding the default forwarding class. All packets

are sent with the same class of service to minimize out of sequence issues.

Defines a remote source 7750 SR that may send mirrored packets to this

7750 SR for handling by the mirror destination service ID.

Configure SAP egress policies.

Configure an egress QoS policy for the SAP.

Mirror Services