Alcatel-Lucent 7750 SR OS Service Manual page 1426

OAM and SAA Command Reference
Parameters
rising-threshold threshold — Specifies a rising threshold latency value. When the test run is
falling-threshold threshold — Specifies a falling threshold latency value. When the test run is
direction — Specifies the direction for OAM ping responses received for an OAM ping test run.
loss-event
Syntax loss-event rising-threshold threshold [falling-threshold threshold] [direction]
no loss-event
Context config>saa>test
Description
Specifies that at the termination of an SAA testrun, the calculated loss event value is evaluated
against the configured rising and falling loss event thresholds. SAA threshold events are generated as
required.
The configuration of loss event thresholds is optional.
Parameters
rising-threshold threshold — Specifies a rising threshold loss event value. When the test run is
Page 1428
completed, the calculated latency value is compared to the configured latency rising threshold.
If the test run latency value is greater than the configured rising threshold value then an SAA
threshold event is generated. The SAA threshold event is tmnxOamSaaThreshold, logger
application OAM, event #2101.
Default
0
Values
0 — 2147483647 milliseconds
completed, the calculated latency value is compared to the configured latency falling threshold.
If the test run latency value is greater than the configured falling threshold value then an SAA
threshold event is generated. The SAA threshold event is tmnxOamSaaThreshold, logger
application OAM, event #2101.
Default
0
Values
0 — 2147483647 milliseconds
Values
inbound — Monitor the value of jitter calculated for the inbound, one-way, OAM
ping responses received for an OAM ping test run.
outbound — Monitor the value of jitter calculated for the outbound, one-way,
OAM ping requests sent for an OAM ping test run.
roundtrip — Monitor the value of jitter calculated for the round trip, two-way,
OAM ping requests and replies for an OAM ping test run.
Default
roundtrip
completed, the calculated loss event value is compared to the configured loss event rising
threshold. If the test run loss event value is greater than the configured rising threshold value
then an SAA threshold event is generated. The SAA threshold event is tmnxOamSaaThreshold,
logger application OAM, event #2101.
Default
0
Values
0 — 2147483647 packets
7750 SR OS Services Guide