Alcatel-Lucent 7750 SR OS Service Manual page 1318

Basic Mirroring Configuration
SAP
More than one SAP can be associated within a single
ingress and egress parameter keywords to define which packets are mirrored to the mirror-dest
service ID.
You cannot create a mirror destination SAP on a SONET/SDH or TDM channel. You can
configure SONET/SDH or TDM channel SAPs as mirror sources.
The port requirements for mirror destination SAPs are as follows:
•
•
•
CLI Syntax: debug>mirror-source# sap sap-id {[egress] [ingress]}
Example: *A:ALA-A>debug>mirror-source# sap 2/1/4:100 ingress egress
MAC filter
MAC filters are configured in the
command causes all the packets matching the explicitly defined list of entry IDs to be mirrored to
the mirror destination specified by the
CLI Syntax: debug>mirror-source# mac-filter mac-filter-id entry entry-id
[entry-id ...]
Example: *A:ALA-2>debug>mirror-source# mac-filter 12 entry 15 20 25
IP filter
IP filters are configured in the
command causes all the packets matching the explicitly defined list of entry IDs to be mirrored to
the mirror destination specified by the
Ingress mirrored packets are mirrored to the mirror destination prior to any ingress packet
modifications. Egress mirrored packets are mirrored to the mirror destination after all egress
packet modifications.
CLI Syntax: debug>mirror-source# ip-filter ip-filter-id entry entry-id
[entry-id ...]
Example: *A:ALA-A>debug>mirror-source# ip-filter 1 entry 20
NOTE: An IP filter cannot be applied to a mirror destination SAP.
Page 1320
The port type must be Fast Ethernet, Gigabit Ethernet, or XGigE.
The port mode must be access.
The port encapsulation types must be dot1q, null, or qinq.
or
debug>mirror-source# port 2/2/1.sts12 ingress
mirror-source
config>filter>mac-filter
of the mirror source.
service-id
config>filter>ip-filter
of the mirror source.
service-id
7750 SR OS Services Guide
. Each SAP has its own
context. The
mac-filter
context. The
ip-filter