Table 1: CLI Commands to Configure VPRN Service Parameters (Continued)
Command
preference
reference-bandwidth
timers
spf-wait
lsa-arrival
lsa-generate
7750 SR OS Services Guide
Configures the preference for OSPF internal routes.
Configures the reference bandwidth in kilobits per second (Kbps) that
provides the reference for the default costing of interfaces based on
their underlying link speed.
Enables the context that allows for the configuration of OSPF timers.
Defines the maximum interval between two consecutive SPF
calculations.
Defines the minimum delay that must pass between receipt of the same
Link State Advertisements (LSAs) arriving from neighbors.
Customizes the throttling of OSPF LSA-generation.
Virtual Private Routed Network Services
Description
Page
1096
1097
1098
1098
1099
1099
Page 899