Alcatel-Lucent 7750 SR OS Service Manual page 1054

VPRN Service Configuration Commands
Use the no form of this command to remove default MDT address from the configuration.
Default
none
data
Syntax data {grp-ip-address/mask | grp-ip-address netmask}
Context config>service>vprn>pim>mdt
Description
This command configures a pool of addresses that can be used to generate data only MDT tunnels.
Parameters
grp-ip-address — The multicast group IP address expressed in dotted decimal notation.
mask — The mask associated with the IP prefix expressed as a mask length or in dotted decimal
netmask — The subnet mask in dotted decimal notation.
data-delay-interval
Syntax data-delay-interval value
no data-delay-interval
Context config>service>vprn>pim>mdt
Description
This command specifies the interval, in seconds, before the provider edge (PE) router connected to
the source switches traffic from default Multicast Distribution Tree (MDT) to the data MDT group.
Default
3 seconds
Parameters
value — Specifies the data delay interval in seconds.
data-threshold
Syntax data-threshold {c-grp-ip-address/mask | c-grp-ip-address netmask} mdt-threshold
Context config>service>vprn>pim>mdt
Description
This command configures the threshold for a group prefix.
Parameters
grp-ip-address — The multicast group IP address expressed in dotted decimal notation.
Page 1054
Values
224.0.0.0 — 239.255.255.255
notation; for example /16 for a sixteen-bit mask. The mask can also be entered in dotted decmial
notation (255.255.0.0).
Values
4 — 32
Values
0.0.0.0 — 255.255.255.255 (network bits all 1 and host bits all 0)
Values
3 — 180
Values
224.0.0.0 — 239.255.255.255
7750 SR OS Services Guide